Commission

I had a very interesting commission recently. A regular customer at the store where I work knew that I did spoon carving. He had a intriguing request regarding a piece of Ash. His family had the use of a canoe belonging to a friend. One of the thwarts of the canoe had become rotten on the edges and he replaced the thwart with a new one.

This was how I received it:

2016-07-13_175450591_23989_iOS

He specified that he did not want straight spoons but wanted them curly or bent. Within the limitations of the piece of Ash, I laid out the best I could using the whole width, and most of the length. As the colour is fairly plain I also set holes at the ends of the spoon to add some interest.

This was my rough cut out:

2016-07-13_180317486_1C586_iOS

Ash is different from any wood I have carved in that it alternates from softish to very hard wood with the growth rings. This gives a very distinct feel as you carve – almost a feel of corrugations.

As I have said many times – the sharper your tool the easier the carve,

The following pic clearly shows the growth rings in this wood.

2016-07-18_200641770_D76E8_iOS

I was quite pleased with the final outcome and so was the customer. The thwart now lives on, and hopefully will grace many a meal. This has spawned another commission – this time a set of salad servers as a wedding present. Better get busy on those……

2016-07-18_200227461_FB476_iOS

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s